This project has moved and is read-only. For the latest updates, please go here.

Whole disc encryption - access 2th partition

I have following issue: Legacy BIOS (no UEFI) Whole system disc encryption with 2 partition - containig 2 partition, system partition and logical partition for data eg notebook gets broken ---> ho...

Id #719 | Release: None | Updated: May 17 at 5:40 PM by Marito | Created: May 17 at 5:40 PM by Marito

no permission to open veracrypt file

Hi, Im using Windows 10 Pro (licensed expiring soon, got this message since this morning). I start veracryp 1.19 select my volume file try to open it and get Error Message like: "no permission ...

Id #718 | Release: None | Updated: May 16 at 7:38 PM by mavtim | Created: May 16 at 7:33 PM by mavtim

"Size on Disk" much larger than original files

Hello. I have run several tests while trying to encrypt about 205GB of data (mostly JPG, TIF, and PDF files). I chose this test grouping as its a sub-set of a much larger overall archive I wish t...

Id #717 | Release: None | Updated: May 17 at 7:52 AM by AdrianKIT | Created: May 16 at 6:34 PM by MapleLeaf77

Extending Volume

Hey there, I extended a container file which is located on an encrypted disk with the Volume Expander tool within VeraCrypt. I see that the file size on disk has changed, but on mounting the contai...

Id #716 | Release: None | Updated: May 15 at 8:52 PM by fldrmausmann | Created: May 15 at 8:52 PM by fldrmausmann

Pretest fails on new System

I bought a new computer and wanted to encrypt it like my old one. The verascrypt installation went normal and i could choose the encryption mode and save the rescuedisk. Everything goes normal ...

Id #715 | Release: None | Updated: May 15 at 12:14 PM by vulkanodox | Created: May 15 at 10:11 AM by vulkanodox

Possible bug report?

Using W10 Pro and VC 1.19. (uninstalled, rebooted and reinstalled to rule out any corruption). Trying to set up a hidden volume on a 500GB partition. Using exFat I can create the outer volume w...

Id #714 | Release: None | Updated: May 12 at 3:22 AM by Garfield2 | Created: May 12 at 3:22 AM by Garfield2

power failure during encryption

Encrypting windows 7 pro pc and had power failure while encrypting was about 45% rebooted pc and it allowed me to resume process but reported bad sectors of disk and asked if I wanted to apply 0 da...

Id #713 | Release: None | Updated: May 11 at 7:52 PM by chadwick75 | Created: May 11 at 7:52 PM by chadwick75

Veracrypt Encrypt the whole drive, multi-boot options greyed out.

Veracrypt Encrypt the whole drive, multi-boot options are greyed out. Whenever I try to encrypt my entire system I find those two options greyed out. Help me out? Please?! The attachment is a rar ...

Id #712 | Release: None | Updated: May 10 at 11:52 AM by lisztomania | Created: May 10 at 11:52 AM by lisztomania

Hidden volume limits to 3,61GB

DELETED BY AUTHOR TO AVOID DUPLICATION - PLEASE SEE MY POST TITLED "POSSIBLE BUG REPORT" FOR MORE UP TO DATE DETAILS.

Id #711 | Release: None | Updated: May 12 at 3:24 AM by Garfield2 | Created: May 6 at 3:50 AM by Garfield2

Volume ID Favorites - High CPU usage

I have several favorites, where the option "Use Volume ID to mount favorite" is ticked. Every of this favorites leads the CPU-usage to increase round about 0,7%. If i untick the option for the fav...

Id #710 | Release: None | Updated: May 5 at 5:37 PM by MarkusJu | Created: May 5 at 5:37 PM by MarkusJu

forgot the password

sir i had installed veracrypt in dec last year and due to job constraints i was out of netwrk for 3 months so i didnt open my vera files.Now i have forgotten the password.How shud i mount the file?...

Id #709 | Release: None | Updated: May 9 at 10:46 AM by metar26 | Created: May 5 at 1:11 PM by Mukesh

Freeze after mount

Sometimes the program freezes after mounting my one and only automount drive. It will not become unfrozen at all - I have to kill the program. However, even if I do, the drive did get successfully ...

Id #708 | Release: None | Updated: May 5 at 9:27 AM by thany2 | Created: May 5 at 9:27 AM by thany2

Issue of arm build: "Invalid characters encountered" after upgrade

One or more of the following updates: upgrade hostapd:armhf 1:2.5~armbian5.25+1 1:2.5~armbian5.27.170428+1 upgrade linux-dtb-next-sunxi:armhf 5.26 5.27.170427 upgrade linux-image-next-sunxi:armh...

Id #707 | Release: None | Updated: Apr 28 at 11:03 PM by RandomNameforCode | Created: Apr 28 at 11:03 PM by RandomNameforCode

Osx Sierra, admin/user password rejected

I tried creating a new volume as in Truecrypt, it asked me for either a user or admin password. Tried both they were not accepted I aborted the program. Will not be using it for now. My password i...

Id #706 | Release: None | Updated: Apr 21 at 1:49 AM by kristijank | Created: Apr 21 at 1:49 AM by kristijank

Veracrypt shutsdown and never finishes

Hello, I have migrated from TC and created an encrypted partition and trying to move everything over, 1.3TB and Veracrypt (latest version) suddenly quits never finishing the job. Where can I g...

Id #705 | Release: None | Updated: Apr 18 at 9:39 PM by belgianfr | Created: Apr 18 at 9:39 PM by belgianfr

Veracrypt bootloader defect

I updated my veracrypt a few days ago to 1.19. I just had a bluescreen which f*cked the bootloader. All the data gone - I have to reinstall everything - thank you veracrypt developer..... St...

Id #704 | Release: None | Updated: Apr 28 at 9:08 AM by Cynyster | Created: Apr 17 at 8:07 PM by 1337LEET

@ doesn't work after update

I recently updated from v.1.17 to v1.19 and now the @ isn't shown as a character in the bootloader. I have it in my password and if i type it nothing happens. No * for a character - but strangely i...

Id #703 | Release: None | Updated: Apr 15 at 1:15 PM by 1337LEET | Created: Apr 15 at 1:15 PM by 1337LEET

VeraCrypt Bootloader failed to boot on a MacBookPro under BootCamp Windows 10 creatures update

The setup: An Apple MacBookPro Notebook with OSX (Apple Mac OS) and a large (897 GB) basic-GPD NTFS partition is the target to encrypt (only the Windows partition). The windows system installed ...

Id #702 | Release: None | Updated: Apr 15 at 9:45 AM by HeinzKreft | Created: Apr 15 at 9:45 AM by HeinzKreft

Read-only NTFS drive on MacOS Sierra

When I open a VC encrypted drive that has NTFS FS under MacOS Sierra, I can't write files through Finder, and Finder says that the drive is read only. In VC itself, it says that the drive is not re...

Id #701 | Release: None | Updated: Apr 13 at 5:45 AM by throw23 | Created: Apr 13 at 5:45 AM by throw23

After encrypting my window 10 system drive. My computer randomly boots without warning..

This never happened before i encrypt it with veracrypt. Aes i tried changing some the setting in bios no luck. And I have all the other drives on my computer encrypted and they work just great. Ca...

Id #700 | Release: None | Updated: Apr 12 at 12:39 AM by Howie535 | Created: Apr 10 at 6:35 AM by Howie535

Windows 8.1 freezes when installing Veracrypt

Hey guys, I just did a windows reinstall a couple hours ago. Was installing all software that I use, until it came to veracrypts turn.. My PC crashes while installing pretty much in the same s...

Id #699 | Release: None | Updated: Apr 6 at 6:21 PM by Ashuran | Created: Apr 6 at 1:25 AM by Ashuran

unable to create NTFS-formatted container

Same bug TrueCrypt had. https://superuser.com/questions/630097/cant-format-truectypt-file-container-to-ntfs many people having this issue.

Id #698 | Release: None | Updated: Apr 6 at 12:30 AM by jitbit | Created: Apr 6 at 12:30 AM by jitbit

Encryption stopped in middle then Decrypt

Hello, I tried to fully encrypt a passport external portable drive but during the encryption process I still had about 14 hours left, I decided to stop it and start the Decryption process instead b...

Id #697 | Release: None | Updated: Apr 5 at 7:07 PM by ryan75346 | Created: Apr 5 at 7:07 PM by ryan75346

Tried to install Veracrypt. Now can't even get into computer

I went through the installation for Veracrypt. I got to the restart part. When I tried to restart, I entered the password, but that didn't seem to work. I used the troubleshooting page that I print...

Id #696 | Release: None | Updated: Apr 5 at 2:20 AM by Anneio | Created: Apr 5 at 2:20 AM by Anneio

Select Device not possible after upgrade to Mac OS 10.12.4

Hello after upgrade to the latest Mac OS Sierra selection of devices is not possible anymore I used the current release of Veracrypt When clicking Select device Root-Password prompt appears as ...

Id #695 | Release: None | Updated: Apr 4 at 4:43 PM by chas0rde | Created: Apr 4 at 4:43 PM by chas0rde

cant boot from my drive!

Whenever I boot from the operating system on my main hdd veracrypt boot loader pops up with #711 and the keyboard controls f5 and esc but neither work I haven't even encrypted my drive

Id #694 | Release: None | Updated: Apr 1 at 11:15 AM by blackciper108 | Created: Apr 1 at 11:15 AM by blackciper108

file system driver(or dll/sys) privilege/priority too high blocking OS (win)

Veracrypt uses/loads a file system driver (windows). I presume this is a DLL or SYS file (or maybe a process at startup). I don't know specifically and can't find any evendence of where/when/how ...

Id #693 | Release: None | Updated: Mar 30 at 11:40 PM by nedsled | Created: Mar 30 at 11:17 PM by nedsled

Unable to mount TrueCrypt volume

I am considering moving over the VeraCrypt which should be able to mount my TrueCrypt volume but can't. I can mount the volume in TrueCrypt 7.1a and copy the files to a new VeraCrypt volume but I'd...

Id #692 | Release: None | Updated: Mar 30 at 9:59 PM by nelem | Created: Mar 29 at 10:57 PM by nelem

Unable to add to system favorites

Hi, When I want to add to system favorites, I have an error The title of the error is ; The partition / system drive does not appear to be encrypted Its not a partition system and the flag ...

Id #691 | Release: None | Updated: Mar 22 at 11:11 PM by Cailrorn | Created: Mar 22 at 11:03 PM by Cailrorn

Linux command line (cli) parsing of MOUNTED_VALUE and equals = sign

The following error occurs: Unexpected characters following option 'dismount'. When running any commands that take a MOUNTED_VOLUME mount point path option like: veracrypt --dismount=/media/drive...

Id #690 | Release: None | Updated: Mar 20 at 6:08 PM by anonjohn | Created: Mar 20 at 6:08 PM by anonjohn

HP Laptop doesn't load Veracrypt EFI file.

I have encrypted my Windows 10 Home system partition on my laptop using VeraCrypt. Microsoft wants too much (~$100) just so I can have a feature that any laptop should have to have from the get go....

Id #689 | Release: None | Updated: Mar 27 at 8:16 PM by dako98 | Created: Mar 17 at 8:54 PM by phantomstranger

Veracrypt NTFS volume name under Win10 Problem Solved

You need to rename Veracrypt NTFS Volume name/label using Win10 'Administrator' account or else the Volume name will not "Stick" (or not actually written)!!

Id #688 | Release: None | Updated: Mar 16 at 12:25 AM by richard_leow | Created: Mar 16 at 12:25 AM by richard_leow

Pretest fails - "Wrong Password/PIM/Hash" SOLVED!

Hello everyone, I tried System Encryption with VC 1.19, 1.18a and 1.20 beta on Windows 10 Pro 64bit, but it says "Wrong Password/PIM/Hash". I tried with: -Boot Option UEFI (only "Enter Passwor...

Id #687 | Release: None | Updated: Mar 19 at 1:00 PM by Mummel_92 | Created: Mar 14 at 8:46 PM by Mummel_92

Windows not bootable, Cant find the Rescue disc.

Hello, im using VeraCrypt for like 3 months now, yesterday i was cleaning my pc (im using windows 10) with Ccleaner and i deleted the Registry with it, after i restarted the pc windows was not abl...

Id #686 | Release: None | Updated: Mar 14 at 10:45 PM by Darkx | Created: Mar 14 at 5:54 PM by Darkx

Cannot create Hidden OS

Hello, I do not have the option to "Create Hidden Operating System" in Veracrypt. The option is simply "greyed" out. I created a partition right after the system partition that has at least 2....

Id #685 | Release: None | Updated: Mar 14 at 9:28 AM by kavsrf | Created: Mar 12 at 2:44 PM by strider_55

NTFS volume under Linux and Win10

Linux can create file with characters that are illegal under Win10 in veracrypt/truecrypt NTFS volume. If you delete those file under Win10, it can corrupt the NTFS filesystem. Veracrypt (Linux) ...

Id #684 | Release: None | Updated: Mar 8 at 11:19 PM by richard_leow | Created: Mar 8 at 11:19 PM by richard_leow

Post-Encryption Error

Hello, I've just encrypted my system partition and non-system partition and upon boot I'm receiving a message saying the encryption message was interrupted. However, when I try to resume the enc...

Id #683 | Release: None | Updated: Mar 9 at 7:45 PM by Jake_Stone | Created: Mar 6 at 4:55 PM by Jake_Stone

Various issues with arm version, which may also affect other builds

When I used veracrypt on my raspi a few days ago, I noticed a few issues with the cli armv7 version: 1) I need libwxbase3.0-0 as a dependency, I guess there are more dependencies for the GUI vers...

Id #682 | Release: None | Updated: Mar 14 at 8:56 PM by Mummel_92 | Created: Mar 4 at 1:40 PM by RandomNameforCode

Change request: WaitDialog()

Often times, I forget that I still have encrypted drives that I have used Truecrypt on before attempting to mount with Veracrypt. This results in a hefty wait time until the event timer returns an...

Id #681 | Release: None | Updated: Mar 3 at 12:12 AM by Fenderluvr | Created: Mar 3 at 12:12 AM by Fenderluvr

volTransferThreadFunction error

Hello, I tried to encrypt USB HD with veracrypt (full disk encryption): Create volume -> Encrypt a non-system partition/drive -> Standard VeraCrypt Volume -> select USB HDD device -> Create encry...

Id #680 | Release: None | Updated: Mar 2 at 10:10 AM by f1sz | Created: Mar 2 at 10:10 AM by f1sz

Veracrypt on Windows and the Recycle Bin: Mount volumes as removable media by default?

Hi, we've been using Veracrypt for our sensitive data for a while and just found out that files deleted from local containers is being moved to the recycle bin. Which is a disaster, the files...

Id #679 | Release: None | Updated: Mar 1 at 4:27 PM by AndreMuller | Created: Mar 1 at 4:27 PM by AndreMuller

Bad PGP signature for linux download

Hi, I downloaded VeraCrypt Linux Setup 1.19 and followed your instruction to verify the PGP signature but got a result: ~/Downloads$ gpg --verify VeraCrypt_1.19.dmg.sig veracrypt-1.19-setup.ta...

Id #678 | Release: None | Updated: Mar 1 at 2:00 PM by wyzhao | Created: Mar 1 at 1:54 PM by wyzhao

Encryption of external hard drive wont continue after restarting laptop.

After 70% done the encryption process to my external hard drive, I shut down my computer and left it for the night as I read that the process could be stopped and continued at any point. I went to ...

Id #677 | Release: None | Updated: Feb 26 at 4:53 PM by C_S99 | Created: Feb 26 at 4:52 PM by C_S99

Veracrypt volume name problem under Win10

Veracrypt volume mounted under win10 does not stick? The volume name seems changing when mount everytime and it seems the volume name was from previous Veracrypt run. (This problem also occurre...

Id #676 | Release: None | Updated: Feb 25 at 10:22 PM by richard_leow | Created: Feb 25 at 10:21 PM by richard_leow

Slow Write Speeds

I have one particular disk that seems to be suffering under Veracrypt. I have a total of 5 encrypted volumes, each on a different drive/array and each using the exact same encryption method - the o...

Id #675 | Release: None | Updated: Feb 24 at 1:03 AM by Lurkios | Created: Feb 24 at 1:03 AM by Lurkios

Permanent drive access

When VeraCrypt is activ, i have a permant drive access with 100kb/s on all drives connected to the computer. So the HDDs can't automatically stop, what they normaly do after 5-10 minutes without an...

Id #674 | Release: None | Updated: Feb 23 at 7:53 AM by Cineatic | Created: Feb 23 at 7:53 AM by Cineatic

VeraCrypt Volume Not Showing in VeraCrypt Menu

Project : Creating a Veracrypt Data Warehouse on an External HD MacOS : 10.11.6 El Capitan VeraCrypt : 1.1.9 I created a 1.9T Veracrypt volume on a brand new Seagate 2.0T external hard drive,...

Id #673 | Release: None | Updated: Mar 10 at 2:33 AM by 4horsemen | Created: Feb 22 at 8:08 PM by TedPPalmer

Serpent(Camellia) Cascading Cipher

Please include a cascading cipher for Serpent(Camellia) in the list of algorithms.

Id #672 | Release: None | Updated: Feb 22 at 6:07 AM by e51df4 | Created: Feb 22 at 6:07 AM by e51df4

IMO, a potential design flaw within "hidden" volumes

Fundamentally, a hidden volume should be, well, hidden. Adding context to the UI that you must "specifically" display and use goes completely against this "hidden" concept. Case in point: The d...

Id #671 | Release: None | Updated: Mar 1 at 5:59 PM by Fenderluvr | Created: Feb 22 at 3:35 AM by Fenderluvr

Strange Keyboard and Clipboard Issues

Hi there, it's happen often, but very differently. no clear pattern why happens. using the last Version. i use Win10 x64. once the Issue Happen then i have following condition: Clipboard n...

Id #670 | Release: None | Updated: Feb 21 at 11:55 PM by Max_001 | Created: Feb 21 at 11:55 PM by Max_001

not modify file but volume file changes

file in veracrypt disk not be modified, but volume file changes after dismount every time. (compare md5sum) this problem confusion me when sync the volume file.

Id #669 | Release: None | Updated: Feb 21 at 5:14 AM by xmokay | Created: Feb 21 at 5:14 AM by xmokay

Dropbox Files Effect of Encryption

Dear Veracrypt team, I am intended to encrypt my drives using Veracrypt. I have online drives (Droppbox & Google Drive) syncing contents between the cloud & the local drives. While all the da...

Id #668 | Release: None | Updated: Feb 22 at 7:18 PM by JohnnyLChang | Created: Feb 20 at 6:18 AM by enduser0987

Unable to encrypt the whole drive (GPT) in Veracrypt

My entire hard drive uses the GPT partition scheme. I am unable to encrypt my whole drive in Veracrypt. Is this feature not yet available? Can Veracrypt only encrypt system drive for GPT partitione...

Id #667 | Release: None | Updated: Feb 19 at 4:42 PM by yashdhakaan | Created: Feb 19 at 4:42 PM by yashdhakaan

Win10: Mounted container not accessible. "Illegal function" message.

I am not longer able to access an existing container file on my Win10 Pro machine. I can mount it and run "Check" & "Repair FileSystem" (both without errors) but if I try to access the assigned d...

Id #666 | Release: None | Updated: Feb 19 at 1:46 PM by LeyDaniel | Created: Feb 19 at 1:46 PM by LeyDaniel

Command line switch "nowaitdlg" doesn't work

On first try, nowaitdlg works always with the default value Y. On following tries, for example when a wrong passphrase has been entered, nowaitdlg works properly.

Id #665 | Release: None | Updated: Feb 18 at 7:32 PM by Ben1802 | Created: Feb 18 at 9:50 AM by Ben1802

Pretest Failed

Installed Vera Crypt on windows 10 Pro 64 bit on a Lenovo Yoga 260 - performed system Encryption Pretest - selected Yes to restart system - which actually shut down the system - turned system on - ...

Id #664 | Release: None | Updated: Jun 25 at 2:47 AM by JiminiDiesel | Created: Feb 17 at 1:46 PM by jbs051

Veracrypt volume missing after restart

I had created a Veracrypt volume / container on a 32 GB USB drive using exFAT file system in windows 8 OS. The veracrypt volume size was set to 25 GB. Yesterday, i mounted the veracrypt volume a...

Id #663 | Release: None | Updated: Feb 13 at 12:19 PM by Vyasang72 | Created: Feb 13 at 12:17 PM by Vyasang72

Veracrypt password not working

My veracrypt volume was mounted when my windows updated a couple days ago. Now when I try to mount it with the password which I know is correct, it does not mount.

Id #662 | Release: None | Updated: Feb 12 at 6:29 PM by instagramlol | Created: Feb 12 at 6:29 PM by instagramlol

Ran VeraCrypt and went to restart computer, now it hangs on a black screen/can't access bios, etc

I saw the issue in the troubleshooting FAQ (https://veracrypt.codeplex.com/wikipage?title=Troubleshooting - Problem: After the system partition/drive is encrypted, the computer cannot boot after ...

Id #661 | Release: None | Updated: Feb 9 at 3:44 PM by Slij | Created: Feb 9 at 3:44 PM by Slij

Cannot access vc mounted volume from Windows Linux Subsystem

With respect to this https://msdn.microsoft.com/en-us/commandline/wsl/install_guide The drives are visible in explorer, but not in the /mnt directory with the other drives. Is there any way to mo...

Id #660 | Release: None | Updated: Feb 9 at 12:43 PM by rithvikvibhu | Created: Feb 9 at 12:43 PM by rithvikvibhu

Windows settings not saved

Hello, Got a strange issue with Veracrypt, every time one of our PC's that's encrypted is restarted all personal settings get reverted. Things like mouse settings, homepage, browser default etc a...

Id #659 | Release: None | Updated: Feb 8 at 12:55 PM by WillBellows | Created: Feb 8 at 12:55 PM by WillBellows

Can't do system encryption pretest.

I've been trying to use VeraCrypt to encrypt a asus transformer book for quite sometime now. I've made many attempts under different circumstances. Everytime I try though the process fails before t...

Id #658 | Release: None | Updated: Feb 6 at 10:02 PM by KingJ50 | Created: Feb 6 at 10:02 PM by KingJ50

Veracrypt doesn't recognize passwords anymore

I have 2 external HDDs fully encrypted with VeraCrypt 1.19, one is NTFS, the other EXT4. Always worked fine until today, whenever i try to open them i get this window: https://s24.postimg.org/83ek...

Id #657 | Release: None | Updated: Aug 13 at 4:07 PM by belgianfr | Created: Feb 4 at 10:44 PM by ecryptfs

Cant Mount My extrenal Hard drive

Hi All I cant mount my Extrenal hard drive after my drive been encrypted and password protected. always it errors with the eror attached with different error number

Id #656 | Release: None | Updated: Feb 8 at 10:23 PM by diadeis | Created: Feb 4 at 4:59 PM by diadeis

Serious bug - volume mounts autmatically with Windows boot

It is second time I note that the VeraCrypt volume is mounted by default right after boot of PC without entering mount password and choosing keyfile while automaunt is not enabled in options! I arr...

Id #655 | Release: None | Updated: Feb 4 at 3:12 PM by Pavluha | Created: Feb 4 at 3:12 PM by Pavluha

Hangs with Oracle Linux 7.3 w/ UEK

Oracle Linux 7.3 (Downstream version of Redhat). If I boot it with Oracle "Unbreakable Enterprise Kernel" 4.1.12-61.1.25.el7uek.x84-64 or the prior 4.1.12-61.1.18.el7uek.x84-64, Veracrypt 1.19 will...

Id #654 | Release: None | Updated: Jan 31 at 9:56 PM by fredmau | Created: Jan 31 at 9:56 PM by fredmau

Launching the GUI in Debian 8.7

Good evening. I've just installed VeraCrypt downloading its .tar file from here and following these instructions for the x64 version. It worked, but I can only use it through CLI, the gnome desktop...

Id #653 | Release: None | Updated: Jan 29 at 8:13 PM by adamyeropoli | Created: Jan 29 at 8:13 PM by adamyeropoli

M.2 SSD performance issues

Hey guys, first of all a huge thank you to Mounir for his work on extending and surpassing TrueCrypt. I've been using VC for quite some time now and I've always been happy with all of the featu...

Id #652 | Release: None | Updated: Mar 5 at 11:48 PM by AdamDoe | Created: Jan 28 at 6:42 PM by AdamDoe

Encrypted containers timestamp not modified when mounted from Windows command line

When a veracrypt container is mounted from the Windows command line, the "last modified" timestamp of the container is not updated. This issue existed in TrueCrypt as well. Any chance to get it fix...

Id #651 | Release: None | Updated: Jan 24 at 5:58 PM by giovi321 | Created: Jan 24 at 3:48 PM by giovi321

Windows update no longer runs once veracrypt is installed

Win10 x64 Enterprise Dell 7240 i7 8gb ram 512 ssd Symantec Endpoint protection 12.1.7061.6600 joined to corporate domain, and using wsus server I just did 2 fresh installs of Win10 (the se...

Id #650 | Release: None | Updated: Feb 4 at 12:07 PM by daniel_mm | Created: Jan 24 at 12:42 AM by 4art4

Problems with undelete

When I delete some files and run R-Studio, Recuva, Norton UnErase utils I don't see deleted files. Moreover some utils don't find all folders (in root). Why is it? Can I rosolve this promblem? How?

Id #649 | Release: None | Updated: Jan 23 at 12:13 PM by 7in | Created: Jan 23 at 12:13 PM by 7in

Ignore

I'm dumb.

Id #648 | Release: None | Updated: Jan 24 at 7:08 AM by gloucester | Created: Jan 22 at 11:45 PM by gloucester

Error while parsing command line

Hello there, I switched from Truecrypt to Veracrypt. I now try to get the command line syntax working again. I'm using a normal VC container on a normal USB Stick. Just transport security for docu...

Id #647 | Release: None | Updated: Jan 22 at 3:02 PM by stormsh | Created: Jan 22 at 1:33 PM by stormsh

In regards to the password not popping up when Windows goes to sleep..

Yes is there any way you guys could make a possible update to have the password come on not only for the boot up but for when you put the computer to sleep? it would be greatly appreciated much.

Id #646 | Release: None | Updated: Jan 20 at 11:01 PM by ehheh1000 | Created: Jan 20 at 7:37 AM by Reaper1337

My volumes are being mounted without entering a password!

I'm not sure what exactly is going on but my Veracrypt volumes have now mounted two separate times after booting my machine without me entering any password. I am using this script to mount the vol...

Id #645 | Release: None | Updated: Mar 18 at 8:47 PM by YahooSerious | Created: Jan 18 at 3:15 PM by orthabel

I Don't see "Do not show any texts in the pre-boot authentication screen"

Windows 10 user here using VeraCrypt 1.19 (64 bit). I have encrypted my system partition and would like to enable the option to not display verbiage to enter my pre-boot authorization. When I go to...

Id #644 | Release: None | Updated: Jan 24 at 3:48 PM by giovi321 | Created: Jan 17 at 7:25 PM by Eboon

source:voltransformthreadfunction:2744

I was trying to permanently encrypt a 1.8Tb hard drive. I started the process and paused it. When resuming the process next morning the following error appears: source:voltransformthreadfunction:...

Id #643 | Release: None | Updated: Feb 4 at 10:27 AM by random1556 | Created: Jan 17 at 1:01 AM by random1556

cannot mount Volume

Hello All, I have the following problem, I just started using VeraCrypt and i have encrypted a removable HDD. ive put some data on it. ive disconnected the drive propperly but now a few days late...

Id #642 | Release: None | Updated: Feb 7 at 8:27 PM by HenkDeVries909 | Created: Jan 16 at 10:21 AM by ShierraWhiskey

Encrypting system drive gives "0xc0000452" error possibly due to main drive not being on disk 0 + screenshots

Using VeraCrypt 1.19 (64-bit) Initially the SYSTEM_DRV was on DISK 0, which is an older slower disk. So I copied the partitions to my DISK 2 SSD Drive which has windows installed, removed the DIS...

Id #641 | Release: None | Updated: Mar 8 at 4:41 PM by in90 | Created: Jan 16 at 9:59 AM by HenkDeVries909

VeraCrypt 1.19 install on Vista requires Workaround

In order to install VeraCrypt 1.19 on Windows Vista, it is necessary to un-check the options to create the start menu and desktop shortcuts. Otherwise the installation fails with the message "Inst...

Id #640 | Release: None | Updated: Jan 15 at 3:56 AM by ErikWlfn | Created: Jan 15 at 3:56 AM by ErikWlfn

VeraCrypt 1.19 Vista Installation Workaround

I have been unable to install VeraCrypt 1.19 on a Vista OS unless I use a workaround. The installation always fails with the message "Installation failed". I discovered a work around for the prob...

Id #639 | Release: None | Updated: Jan 20 at 11:20 PM by ehheh1000 | Created: Jan 15 at 3:54 AM by ErikWlfn

Boot order in Windows 10 w/UEFI

I finally got the system to boot with the VeraCrypt driver first, but then it accepts my password in the test, goes to start...and then shuts down. It does this in a loop. I eventually F12 back to ...

Id #638 | Release: None | Updated: Jan 13 at 10:18 PM by cwj1284 | Created: Jan 13 at 10:18 PM by cwj1284

NVIDIA driver fail with EFI boot windows 10

Hello, I use VC 1.19 with my Lenovo T530 Notebook. The T530 have onboard HD Graphics and a dedicated NVIDIA NVS 540M Graphic Card which drive my second Monitor. I wanted to encrypt windows system ...

Id #637 | Release: None | Updated: Jan 13 at 12:40 PM by ebnet | Created: Jan 13 at 12:40 PM by ebnet

Streebog on Command Line

Hi, There doesn't seem to be support for choosing the Streebog hash on the command line: "/hash Streebog" returns an error (on Windows 7). All other hashes work fine from the command line. ...

Id #636 | Release: None | Updated: Jan 10 at 2:06 AM by e51df4 | Created: Jan 10 at 2:06 AM by e51df4

Password incorrect after disconnecting hard disk while in hibernate

Hello, unfortunately it happend that my external hard disc has been shut down and disconnected while my PC was in hibernate. Here is what happened in detail: 1) I decrypted my veracrypt-contain...

Id #635 | Release: None | Updated: Jan 9 at 3:24 PM by coroa | Created: Jan 9 at 3:24 PM by coroa

Volume created on windows 7 64 bit can't be opened in windows 10 home 32 bit and viceversa

Hi, I just upgraded my Aspire Switch 10 from windows 8.1 to windows 10 32 bits few days ago. after the upgrade I just started to copy stuff from my windows 7 PC to the Aspire switch 10, I just ins...

Id #634 | Release: None | Updated: Jan 7 at 3:49 AM by eliasavila | Created: Jan 7 at 3:49 AM by eliasavila

Constant disk utilization when automatic mounting of favorite volumes is enabled

Overview: Veracrypt continuously reads on all connected drives (internal and external) at ~16kb/s when the system has unmounted "Favorite Volumes" that have the option "Mount selected volume when ...

Id #633 | Release: None | Updated: Jan 5 at 12:18 PM by madcat123 | Created: Jan 5 at 12:18 PM by madcat123

Can't unmount usb hdd in Win, after I mounted-dismounted in Veracrypt (Only in Win10)

Hello! I make a container file on a hdd, and I put it into an usb docking station. I mount it in Veracrypt 1.19 and dismount it (it doesn't mind, whether I read/write on the disk or not), Veracry...

Id #632 | Release: None | Updated: Jan 6 at 6:35 AM by EstebanLopez | Created: Jan 4 at 7:13 PM by CPLX

Win 10 x64 full system ssd encrypted, no booting possible

Hi, i encrypted my msi laptop win 10 x64 system-ssd. pre-encryption worked, encryption worked, no system booting possible. uefi, nonuefi, nothing... windows always starts into repairmode, but ofc...

Id #631 | Release: None | Updated: Jan 10 at 11:41 AM by HighTech2016 | Created: Jan 4 at 4:00 PM by casionline

WILL PAY FOR HELP WITH DECRYPTION - Can't decrypt due to bad block read on one m.2 sata of encrypted raid 0 Array

​Help wanted - WILL PAY DOR SOLUTION Problem: Encrypted SYSTEM Raid 0 (2 SATA m.2 drives in RAID controller set to RAID 0) drive w VERACRYPT 1.13. Windows problem required decryption. Upon attemp...

Id #630 | Release: None | Updated: Jan 23 at 5:35 AM by hierA | Created: Jan 4 at 5:41 AM by iencrypt4me2B

Cannot encrypt system in Windows 10

I cannot encrypt my 64-bit Windows 10 with VeraCrypt. I get the above choices. The wizard only lets me pick the Windows installed drive; the selection to encrypt the entire system (which is what I ...

Id #629 | Release: None | Updated: Jan 3 at 8:28 PM by cwj1284 | Created: Jan 3 at 8:28 PM by cwj1284

Running UWP apps on a separate partition

I have used VeraCrypt to encrypt all of my drives and have noticed that UWP apps not installed on the OS drive no longer start. If I move them to the C drive there is no issue, but they normally re...

Id #628 | Release: None | Updated: Jan 1 at 7:17 PM by KingJ50 | Created: Jan 1 at 7:13 PM by KingJ50

operating mode question (LRW vs XTS)

I have a current Truecrypt volume that has an operating mode of LRW. I note that the only choice I have on VeraCrypt is XTS. Is there a way to convert the operating mode from this TrueCrypt volum...

Id #627 | Release: None | Updated: Dec 29, 2016 at 11:39 PM by rksmith613 | Created: Dec 29, 2016 at 11:39 PM by rksmith613

encrypted volume - existing/not existing patitions

Hi. (please excuse my english - it´s not perfect ;)) During Xmas I tried to encrypt my 4Tb hard drive. Windows is telling me, there is only 1 partition http://i.imgur.com/njfr32F.jpg TrueCryp...

Id #626 | Release: None | Updated: Dec 26, 2016 at 11:35 PM by cloud321 | Created: Dec 26, 2016 at 9:51 AM by cloud321

Google Chrome blocking download

When trying to download veracrypt using Google Chrome, I get a message saying "This file is malicious, and Chrome has blocked it. I see this for the Windows, Mac OS X and Linux download. I've tri...

Id #625 | Release: None | Updated: Dec 27, 2016 at 10:12 PM by idrassi | Created: Dec 19, 2016 at 9:22 PM by franha11

Can't boot, Classpnp.sys

I recently installed this on some new work machines, and now some of them cannot boot. They worked fine for a few boots and have now begun crashing before fully loading windows. They even crash in ...

Id #623 | Release: None | Updated: Dec 19, 2016 at 6:58 PM by spdaniel89 | Created: Dec 19, 2016 at 6:58 PM by spdaniel89

Automount (System Favorite) not working at first boot up (UEFI)

On the first boot of my pc the system favorite volume doesnt mount in 95% of all cases. I do an reboot again and type in the exact same passphrase after that its working. I use Windows 10 with U...

Id #622 | Release: None | Updated: Jan 7 at 11:41 AM by ryperx | Created: Dec 17, 2016 at 10:23 PM by ryperx

Mount into NTFS folder

Is there any hope VeraCrypt supports/will support mounting a container into an NTFS directory? Drive letters go out so quickly and are so confusing ...

Id #621 | Release: None | Updated: Dec 20, 2016 at 7:46 AM by testoslav | Created: Dec 15, 2016 at 3:35 AM by divB

Burn new rescue disk

Hi, I just finished encrypting my system drive and skipped the backup disk thinking I could do it later. While in short, it's later and to my surprise there is no VeraCryptRescueDisk.iso file,just ...

Id #620 | Release: None | Updated: Dec 12, 2016 at 10:36 PM by Sumdumgoy | Created: Dec 12, 2016 at 10:36 PM by Sumdumgoy

Evil-Maid attacks

Hello - I'm in need of help. I've downloaded and installed VeraCrypt 1.19 (64 bit) with absolutely no problems :-). Unfortunately, I'm having to, after three or four days, reinstall VeraCrypt becau...

Id #619 | Release: None | Updated: Dec 12, 2016 at 5:59 PM by WalterAHorton | Created: Dec 12, 2016 at 5:53 PM by WalterAHorton